Shandong Huaqi Automotive Technology Co., Ltd. is one of the leading manufacturers and suppliers of aluminum alloy tank semi-trailer in China. If you're going to wholesale classy aluminum alloy tank semi-trailer made in China, welcome to get free sample from our factory. All customized products are with high quality and low price.
|
|
|
|
|
3 axles (optional 2/4 axles) |
|
|
5083/5182 aluminum alloy |
|
|
30–50 m³ (customizable) |
|
|
0.4–0.6 MPa |
|
|
1–5 compartments (optional) |
|
|
6–8 tons (lightweight design) |
|
|
High-strength steel/aluminum alloy frame |
|
|
12R22.5 (12 units) |
|
|
|
|
|
2" / 3.5" |
|
|
Anti-static device, overfill prevention valve, emergency shut-off valve, anti-slip ladder, safety railing |
|
|
Dual-line air brake + ABS |
|
|
Fuel, diesel, edible oil, chemical liquids (non-corrosive) |
Gasoline, diesel, kerosene, and other light petroleum products; this is the most prevalent vehicle type for trunk-line logistics.
01
Methanol, ethanol, ethylene glycol, and certain other non-highly corrosive chemical media (subject to compatibility assessment).
02
Drinking Water / Food-Grade Liquids
Certain food-grade aluminum alloy tanks are suitable for transporting drinking water, fruit juices, edible oils, and similar products.
03
Urban and Long-Haul Hazardous Materials Distribution
High-speed trunk lines, inter-provincial transport, and distribution from oil depots to gas stations.
04
Standard-Load, High-Efficiency Transport
Ideal for regions with strict regulations on vehicle overloading, maximizing profitability through "increased payload, fuel efficiency, and regulatory compliance."
05
A: Lighter Weight: For the same volume, they are 3 to 5 tons lighter than carbon steel tanks, allowing for an additional 3 to 4 tons of payload within standard load limits.
Fuel Efficiency: Due to their lower tare weight, fuel consumption is 1 to 3 liters lower per 100 kilometers compared to carbon steel tanks.
Rust-Resistant: Aluminum alloy is corrosion-resistant; consequently, the tank body is virtually immune to rusting and leakage.
High Resale Value: Even after 5 to 8 years of use, the equipment retains a high resale value on the secondary market.
Easy to Clean: The interior walls are smooth and resistant to scale buildup, making them ideal for the rotational transport of various types of petroleum products.
A: No.
Standard aluminum alloys are not resistant to highly corrosive media such as strong acids, strong bases, or saline solutions.
For such media, stainless steel tanks or tanks with an internal anti-corrosion lining should be selected instead.
A: Yes, it is normal. Aluminum alloy conducts heat rapidly; therefore, when transporting gasoline or diesel, the significant temperature difference between the interior and exterior of the tank frequently leads to condensation.
As long as there are no oil leaks at the manholes, bottom valves, or pipeline connections, this phenomenon is considered normal.
Q: Under what circumstances is it not advisable to purchase an aluminum alloy tank semi-trailer?
A: When primarily operating in construction sites or mining areas characterized by extremely poor road conditions and frequent chassis scraping.
When the budget is severely limited and operations are restricted to short-haul, short-cycle routes.
When transporting corrosive substances on a long-term basis.
Популярни тагове: aluminum alloy tank semi-trailer, China aluminum alloy tank semi-trailer manufacturers, suppliers, factory, Полуремарке с резервоар от алуминиева сплав, Полуремарке с резервоар от въглеродна стомана, Танк полуремарке
